EOSINT P350 produces by EOS for laser-sintering of plastics
The system is optimized for the material.
Radiation heaters are used to heat the powder bed when preheating is needed.
The powders are joined by a variety of mechanisms: material melting, surface bonding, sintering aids, and polymer coatings.
Materials include polyamides (nylon), polystyrene, and a polymercoated sand.
EOSINT P350 works with thermoplastic materials and is focused on investment casting patterns (polystyrene) and model making (polyamides).
In its plastic sintering process, EOS builds a box surrounding the part.
Later, when this is removed from the build chamber, the box holds the part in an insulating layer of powder, and thermal cooling can proceed in a room environment.
Using its own technology, EOS speeds up the turnaround time for use of the machine.
Parts can be removed in a “hot” system, greatly reducing the cool-down, heat-up cycle time.
400 V, 50 Hz
Laser Synrad 48-5 IR CO2 Laser
Dimension ax. 340 x 340 x 590 mm3
Capacity: ca.12 kW
Very good optimal condition
Manufacturer > EOS
Types of equipment > Polyamide powder
Reference > M120406
Date of manufacture > 1997
Tel : +33 (0) 2 99 16 35 35
fax : +33 (0) 2 99 46 41 41
29 Rue de l’ Isle Celée - BP 80126 - 35801 DINARD Cedex - (FRANCE)
CNIL : N°898941
Do you want to sell your machines? If you are a machine builder, please send us an exhaustive list of your products with a detailed (...)>> More
You are looking for a new or second hand machine: machine tool, machine for railways maintenance, composites applications, power generation, (...)>> More