Home > new > MachinesTools/Composites > Milling 5A > Machining Center Turbomill i

Machining Center Turbomill i

Machining Center Turbomill i

TURBOMILL i, is a single-spindle machining center with 5 axes for milling precision at high speed. The machine is used both for the rough finishing of complex shapes, such as propeller blades and turbine and reactor according to the technique of extrusion


The machine was build especially (but not only ) for the aerospace industry and machining of forged blades and tanker blades. Some typical applications include aerospace grinding fan blades, parts OGV or structural edges of metal attack , blades tanker . 

Because of its configuration and axis of flexibility , it is also possible to machine small impeller and blisks . A milling spindle with high speed motor vector control offers a wide range of speeds , Including dedicated milling spindles at high RPM for the machining of aluminum alloys . 
The particular arrangement of the axes into account the various requirements for dynamic axes with the corresponding weight distribution on the axles , where for example the axis with the greatest dynamic has the smallest mass . 
Under the principle of TPP ( Tool Pivot Point ) that the face of the milling spindle is offset towards the rear relative to the pivot axis B , the compensation movements of the linear axes are limited because of the maximum pivotal movement of the milling spindle . This results in better dynamics of the machine, a greater machining accuracy with improved surface quality and lower torques that affect the axis line manual pivotement.

Models available: Turbomill800 i, i Turbomill800

• Max. turbine blades : up to 1400 mm (incl. equipment ) 
• Configuring Single- line manual spindle
• 0.5g simultaneous acceleration (5A) 
• Machine frame : robust cast 
• TPP Tool Pivot Point concept

Types of equipment > Milling 5A

Secteurs d'activité > Aerospace


MANUFACTURER

LIECHTI

LIECHTI ENGINEERING designs and manufactures machining centers 5 and 6 axes for aerospace and energy industry

Contact

Tel : +33 (0) 2 99 16 35 35
fax : +33 (0) 2 99 46 41 41
multistation@multistation.com

29 Rue de l’ Isle Celée - BP 80126 - 35801 DINARD Cedex - (FRANCE)
CNIL : N°898941

News

SELL YOUR EQUIPMENT

Do you want to sell your machines? If you are a machine builder, please send us an exhaustive list of your products with a detailed (...)

>> More

ARE YOU LOOKING FOR A MACHINE?

You are looking for a new or second hand machine: machine tool, machine for railways maintenance, composites applications, power generation, (...)

>> More

MOST OF MULTISTATION

  • Sourcing
  • Audit
  • Manpower
>> More

CHECK OUT OTHER RELATED FIELD EQUIPMENT OR CATEGORY

MODIG Milling 5 axis machine AeroMill

MODIG MACHINE TOOL

No one else comes close to approaching the affordability of AeroMill and no one beats its (...)

>> More details

MIKROMAT 40, 40VF : Precision portals machining centers for very large parts

MIKROMAT 40, 40VF : Precision portals machining centers for very large parts

MIKROMAT

The MIKROMAT 40V, 40VF allow complete machining of very large workpiece with complex (...)

>> More details

MIKROMAT 12V, 20V : Precision portals machining centers

MIKROMAT 12V, 20V : Precision portals machining centers

MIKROMAT

The MIKROMAT 12V, 20V machines allow complete machining of the part in one take, from roughing (...)

>> More details