Composites & Others

Eagle C125

Manufacturer : EASTMAN

Télécharger l’offre de la Eastman C125

The Eastman Eagle C125 conveyor system boasts supreme capabilities for single- to low-ply cutting requirements. It has the ability to continuously convey rolled material goods with consistent speed and control. Eastman’s gantry and tool head design are engineered to cut the most diverse technical and industrial fabrics available, while exceeding industry standards for accuracy.

The robust conveyor design delivers unrivaled levels of material utilization and is often capable of cutting multiple layers without plastic overlay. This computer-controlled cutting system requires minimal operator guidance to automatically feed and spread material to the identified start position.

  • Exclusive InMotion™ software enables the conveyor to continuously move while the gantry is cutting (option)
  • Tremendous efficiency for pattern pieces exceeding the table length
  • Choice of 60 blades, punches and notches
  • The machine will be presented at the EASTMAN’s booth at the JEC Fair from March 6th to 8th 2018!
Reference : M171207
Validated & certified by Multistation
Do you need more information ?
Call me back
Request a quote


  1. Brushless DC Servo motor control
  • Synchronized dual X-axis servos


  1. Working range (Addressable)
  • X-axis: 9’ / 2.74m, 8’ / 2.44m with inkjet installed
  • Y-axis: 70.6” / 1793.24mm
  • Maximum plotting and cutting speed: 152.4cm/s
  • Maximum acceleration: 1.3 G


  1. 7” Widescreen LCD, Full Color Control Panel, Restrictive Touchscreen, Interface Terminal (HMI) Nema 4X Protection


  1. Precision machined aluminum alloy construction; clear anodized for superior finish protection.
  2. Safety features
  • Two stop discs
  • Four remote emergency stops




  1. Three Tool Cutting Head with pen lift assembly
  • (1) 1” Round Blade Mount (10 spare blades)
  • (1) 2” Round Blade Mount (10 spare blades)
  • (1) Drag Blade Mount (10 spare blades)


  1. Laser diode alignment tool
  2. Tool Changing Station
  3. Tool depth gauge and depth limiters
  4. Theta axis servo-drive brushless motor
  5. Electronic pressure control of all tools
    1. JetPRO HR Inkjet PrinterOPTION


  • Thermal Inkjet drop-on-demand printing technology
  • Print speeds up to 300mpm (984fpm)
  • Maximum resolution 600 x 600 dpi
  • Line speed dependent on selected print resolution
  • Various compatible linear, 2D, Uni codes; Supports TrueType® Fonts
  • Nominal character height from up to 1/2 in (12.70mm) – Single print head
  • Character sets and interface options available in multiple languages
  • Simple ink cartridge system requires minimal maintenance
  • Black ink cartridge supplied as standard (other colors available)
  • Reduces addressable cutting length by additional 1 ft. (0.30 meters)




  1. Ergonomic design
  2. Containment unit for all power and control hardware
  3. Constructed of heavy 11 gauge steel/scratch resistant inside & out
  4. Easy access sealed door for inspection and maintenance
  5. Diagnostic codes to provide operational status
  6. Extensive system diagnostic capabilities through SynqNet controls
  7. High performance control network – SynqNet
  8. Fan cooled enclosure for optimal computer performance
  9. Computer enclosure to completely seal and to protect against high particulates
  10. Equipped with 230V, 3 Phase, 50/60HZ with 400V, 3phase step-down transformer


Note: Transformer to be mounted to conveyor base. Eastman will supply cable from transformer to Cabinet. Customer to supply cable from outside power source to transformer.





  1. Motion Control Multi-Axis Control Computer


  • Microsoft Windows Operating System
  • 50cm (20”) Flat Screen LCD Monitor
  • Keyboard with USB Ports & Mouse




  1. Heavy duty welded construction
  2. Precision ground linear rail
  3. 12 DP rack and pinion drive system
  4. One Internal 380V/3ph / 10HP / 60Hz high flow blower and silencer with VFD control

Note: The electrical and any required enclosures for the VFD

are the responsibility of the customer.


  1. Micro-Perforated Urethane Cast Cutting Belt (85dm)
  2. 28 cm/sec Conveyor Drive Assembly
  3. Standard Allen Set (international only)



FEEDING SYSTEM Single-Roll Roll Stand (CRA-310) – OPTION

  • Automatic edge control
  • Maximum roll diameter 24” (61 cm)
  • Manual roll brake
  • Up to 300 lbs. (136kg), provided with a 300lb. (136kg) Expandabar and CONES

Type/Model : Eagle C125 Conveyor System C125-7212

YOM : 2017

Process : Cutting

Condition : Very good condition




Sell your machine ?

Sell your machine in a few clicks with our exclusive and confidential second hand marketplace

Sell your machine