3D Printers

3devo – Filament Maker X10

Manufacturer : 3Devo

The 3devo Filament Maker X10 is a closed-loop, automated extrusion system built to produce your own filament continuously and unattended: up to 1.5 kg/h, up to 450 °C and a diameter accuracy of ±30 µm on the spool. From powder, regrind or pellets, it turns your MJF/SLS powder waste, recycled materials or custom formulations into print-ready spools.

Reference : FMX10
technique
Support
rea-paiement
Secure Payment
Do you need more information ?

Become your own filament supplier

The Filament Maker X10 (FMX10) is a fully automated, closed-loop extrusion system built for one thing: continuous, reliable, unattended filament production. Load the hopper, thread the filament once, and the machine runs by itself. It holds its own diameter, temperature and tension for hours at a time. The only thing left to do is change the spool.

It is designed for teams who want to decentralize their filament supply and produce their own material on demand, instead of relying on an external supplier.

The FMX10 was proven before launch: 15 machines tested over more than six months, six pilot customers and 3devo‘s own internal production line, with more than 2,000 kg of MJF powder waste processed.

One machine, three main uses

MJF / SLS powder recycling

Every powder-bed print leaves behind unfused powder that cannot be reused at full ratio in the printer. The FMX10 turns it directly into filament, in-house. 3devo’s own line is the reference case: more than 2,000 kg of PA12 waste processed on site.

Print farms

Filament is often the biggest recurring cost of a print farm, and a common cause of stoppages. The FMX10 runs continuously and autonomously, in the same room as your printers.

Materials development

The longer cooling path makes low-viscosity materials easier to process, so finding the exact parameters becomes less critical. A custom formulation becomes a finished spool, in-house.

Designed for unattended production

Automatic closed-loop control

Diameter is measured continuously by an in-line sensor, and the control loop adjusts extrusion in real time. No manual tweaking mid-run, and no need to stand next to the machine: monitor it remotely from wherever you are.

Measured after cooling

The 3-axis optical sensor sits at the end of the cooling path, once shrinkage has settled. Its scan rate is tuned for production-scale output. The result: a ±30 µm tolerance held on the spool (reference value with rPA12 + carbon fiber).

A longer cooling path

The filament travels 2.80 m from nozzle to spool (1 m silicone conveyor belt + 1.8 m return to spool). This gradual cooling means the filament is placed, not stretched. It delivers up to 5× the output of the Filament Maker TWO and lets low-viscosity and recycled materials run at speed.

Powders, regrinds and abrasive materials

The SmartFlow Hopper’s vibration feeder keeps regrinds and powders, including MJF/SLS waste, flowing without bridging. The tempered DC53 tool-steel screw and hardened nozzles stand up to abrasive, filled compounds run after run.

Compatible materials

The FMX10 processes a wide range of thermoplastics, from common polymers to high-performance materials, for both materials development and application-driven production.

  • MJF / SLS powders: direct recycling of powder waste (PA12)
  • Recycled and common polymers: PET, PETG, PC, PLA, ABS, PHB, PP, PS, ASA, HDPE, LDPE
  • Engineering polymers: TPU, TPE, POM, PCL, PA6, PA66, PA12, PVA, PA
  • High-performance polymers: PEEK, PEKK, PEI, PSU, PPSU
  • Additives and composites: carbon fiber, glass fiber, ceramic powder, metal powder, wood, chemical additives, nanoparticles, polymer blends, biodegradable polymers

Not sure whether your material is extrudable? The Multistation team can review your case with you and help define the right next step.

Machine details

Extrusion system

  • Actively cooled barrel: feed zone with controlled temperature, enabling 24/7 continuous operation (validated with PEEK)
  • 4 independent heating zones, up to 450 °C, with ±0.1 °C stability
  • High-torque, encoder-equipped motor: 48 Nm at 3 RPM, 40 Nm at 15 RPM, 0.1 RPM stability and instant stall detection
  • Dedicated chassis and on-machine touchscreen with material presets

Feed system

  • 7.25 L SmartFlow Hopper for powders, regrinds and pellets, with enough capacity for a full 3 kg spool
  • Vibration feeder (50 to 350 Hz) linked to material presets
  • Anti-bridging design for steady flow

Screw and nozzles for abrasive materials

  • Tempered through-hardened DC53 tool-steel screw (58–62 HRC), 17.75 L/D, 2.25 compression ratio
  • E3D nozzles, Ø 2 or 3 mm, in two versions: nickel-coated copper (for high-temperature materials such as PEEK) or nickel-coated hardened tool steel (for abrasive and filled compounds)

Winding

  • Auto-locking spool holder with precision left-to-right winding
  • Spools up to 3 kg / Ø 300 mm
  • Spool fullness detection, remotely monitored
  • Tensioner arm for consistent tension during automated spooling

Remote monitoring and control

  • Continuous operation, designed to run 24/7
  • Remote monitoring and operation (Ethernet connection), process data logged per spool
  • Dashboard for managing multiple machines
  • Plug-and-play setup

A recognized manufacturer

3devo has more than 3,000 systems installed since 2016, in over 40 countries. The Filament Maker X10 is CE certified.

Let’s talk about your filament production project

Powder recycling, print farm, materials development: the Multistation team supports you in choosing and setting up your solution. Contact us to discuss your materials and production goals.

Contact us!

<ul>
<li><strong>Dimensions</strong>: 1,785 × 400 × 692 mm (70.3 × 15.7 × 27.2 in)</li>
<li><strong>Weight</strong>: 57 kg (125 lb)</li>
<li><strong>Throughput</strong>: up to 1.5 kg/h (reference value: PLA), varies with material density and settings</li>
<li><strong>Extrusion speed</strong>: up to 25 RPM</li>
<li><strong>Process control</strong>: fully automatic closed loop, set diameter held from live sensor readings, no manual tuning during runs</li>
<li><strong>Heating</strong>: 4 independent zones, up to 450 °C, ±0.1 °C stability</li>
<li><strong>Feed zone</strong>: active cooling, controlled temperature</li>
<li><strong>Continuous operation</strong>: designed to run 24/7 (validated with PEEK)</li>
<li><strong>Screw</strong>: tempered DC53 tool steel, 58–62 HRC, 17.75 L/D, 2.25 compression ratio</li>
<li><strong>Motor</strong>: 48 Nm at 3 RPM, 40 Nm at 15 RPM, 0.1 RPM stability, encoder stall detection</li>
<li><strong>Hopper</strong>: SmartFlow 7.25 L, powders, regrinds and pellets, vibration feeder 50–350 Hz linked to presets</li>
<li><strong>Cooling path</strong>: 2.80 m total (1 m silicone conveyor belt + 1.8 m return to spool), tensioner arm for tension control</li>
<li><strong>Filament sensor</strong>: 3-axis measurement, 10 µm resolution, more than 25 measurements per second, integrated infrared camera for surface temperature, ±30 µm on-spool tolerance (ref. rPA12 + carbon fiber)</li>
<li><strong>Winding</strong>: auto-locking spool holder, spools up to 3 kg / Ø 300 mm, spool fullness detection monitored remotely</li>
<li><strong>Nozzles</strong>: E3D Ø 2 or 3 mm. Nickel-coated copper (~300 W/m·K, up to 450 °C, for high-temperature materials such as PEEK) or nickel-coated hardened tool steel (~50 W/m·K, 60–65 HRC, for abrasive and filled compounds)</li>
<li><strong>Power</strong>: 110 V / 230 V versions</li>
<li><strong>Connectivity</strong>: plug-and-play setup, remote monitoring and operation via Ethernet, process data logged per spool, multi-machine management dashboard</li>
<li><strong>Certification</strong>: CE</li>
</ul>

Manufacturer

3devo

3Devo

3Devo : CREATION OF CUSTOM 3D PRINTING FILAMENTS Ecosystem dedicated to experimentation, production and recycling of 3D printing filament. Innovation at Light-speed Back in 2014, 3Devo started tweaking the very first filament maker prototype. Along the way, many improvements have been made to what is known today as the Composer and Precision…

DiscoverAll manufacturers