19/11/26

Dutch manufacturer 3devo unveils the Filament Maker X10 (FMX10), a compact filament production system for continuous, unattended operation on powders, regrinds or pellets. It produces up to 1.5 kg/h with a diameter tolerance of ±30 µm on the spool, the consistency you would expect from a commercial filament supplier. It installs on an existing bench and is run by the people already on the floor. It is available now from Multistation.
Prototypes and gimmicks are giving way to end-use parts, and that changes what materials are worth. To survive real applications, materials are now engineering-grade, advanced and expensive. Three things then shift at once: waste becomes worth recovering rather than worth disposing of, supply becomes a resilience question rather than a purchasing one, and material development stops being a research exercise and becomes a production requirement.
The math is simple. Virgin PLA costs around €10/kg, so recycling it is mostly an ethical exercise. By contrast, PA12 powder from MJF and SLS printing costs €50–100/kg, and 50–60% of the powder in a build goes unused. A busy facility scraps well over a tonne a year. Same machine, same process: the difference is entirely what the waste is worth.
Until now, making your own filament in production quantities meant choosing between two options, and neither really fitted. An industrial extrusion line does the job properly, but it demands capital, floor space, three-phase power, chilled-water plumbing, long changeovers, volumes high enough to pay off, and an operator who understands extrusion watching the machine throughout the run. Compact filament makers, such as 3devo’s own Filament Maker TWO, answer a different question: can this polymer become printable filament at all? They remain the right tool for that, and in a lab where bench space is the binding constraint, the Filament Maker TWO is still the machine 3devo recommends.
In between, there was nothing. The FMX10 fills that gap: production output and unattended running in a compact, plug-and-play system, on single-phase power, with no plumbing and no installation project.
Extruded material has to cool below its glass transition temperature before it can be spooled as printable-quality filament. On a compact machine, that cooling distance is short (17 cm on the Filament Maker TWO), and it is the cooling, not the melting, that caps production speed.
On the X10, the filament travels 2.80 m from nozzle to spool, carried along a silicone conveyor belt. This gradual, controlled cooling means the filament is placed rather than stretched, which unlocks 1.5 kg/h, roughly five times the output of the Filament Maker TWO, without giving up dimensional consistency. The belt is air-cooled, so there is nothing to plumb in.
To stay compact, the filament does not travel in a straight line. It leaves the nozzle onto a 1 m silicone conveyor belt, turns around the tensioner-arm wheel at the far end, then returns along a 1.8 m path to the spool inside the machine body. That makes 2.80 m of cooling in a system 1,785 mm long.
The four independently controlled heating zones run up to 450 °C with ±0.1 °C stability. They open the door to high-temperature polymers such as PEEK and PEI (Ultem), but also to low-temperature polymers such as PCL, as well as filled and composite materials, all of which need extended, controlled cooling to solidify without warping or locking in internal stress.
Output alone does not make filament usable. The FMX10 holds a ±30 µm diameter tolerance on the spool, measured here on recycled PA12 with recycled carbon fiber: a filled, recycled feedstock, far tougher than an easy virgin material. Compact filament makers had not delivered this level before.
That accuracy comes from where and how the filament is measured. A 3-axis optical sensor sits at the end of the cooling path, after shrinkage has settled, and feeds a fully automatic closed loop that holds the set diameter from live readings. There is no manual tuning during a run and no reason to stand next to the machine. Monitoring and control can be done remotely over the internet or a local network, and spool quality can be checked from the dashboard. The only manual steps are starting, changing spools and shutting down.
For production users, downtime is the real cost. Machines are therefore monitored remotely over the user’s own local network and can optionally be connected to the internet so that 3devo’s support team can reach the machine directly and help troubleshoot.
The recycling case is strongest for high-value feedstock: PEEK, engineering-grade biopolymers, carbon- or tungsten-filled compounds. Recovering them costs less than buying new spools, and it is also the more sustainable route. MJF and SLS powder is one well-defined example among many, and the return varies considerably with the material and the conditions at each facility.
3devo applies this reasoning itself. Over the past year, the company has collected more than 2,000 kg of MJF PA12 powder waste, extruded it on FMX10 machines and printed it into parts for its own manufacturing lines: machine brackets, covers and casings, some blended with recycled carbon fiber. These parts are strong enough to replace components that were previously CNC-milled, and they are made from 100% recycled material at close to zero material cost. One of them, a filament stabilizer bracket, is fitted to the FMX10 itself: the machine contains parts printed from filament it produced, from powder that was destined for disposal.
Measured to ISO 527 by 3devo on filament produced on the Filament Maker X10:
The model also works commercially beyond 3devo’s own floor. In the UK, filament supplier Filamentive sells rPA12, a recycled nylon filament made entirely from MJF powder waste and produced on the Filament Maker X10, which it describes as the first commercially available filament of its kind.
As an illustration of the economics rather than a promise: a setup recycling around 2,000 kg a year, on office hours, can avoid roughly €80,000 of material purchasing and about 9.6 tonnes of CO₂ compared with buying virgin material. Actual figures depend heavily on the material, the volumes and the conditions at each site.
The same cooling path that raises output also widens what can be run. Because the belt carries the filament rather than letting it hang, melt strength matters far less: low-viscosity materials become processable, and finding the exact extrusion parameters is much less critical. For teams developing materials, that means more flexibility and a much shorter loop: a custom formulation can become a finished, measured spool of filament within a day, in-house.
For print farms, small-batch and certified producers, and filament suppliers, the value lies in owning the supply rather than depending on it. Among the pilot customers, a retail lighting manufacturer runs an FMX10 in the same room as its 3D printing farm, worked by the same operators: spools are produced alongside the printing rather than as a separate operation.
The X10 was developed with six pilot customers across automotive, medical, retail lighting manufacturing, 3D print farming and commercial filament supply. Fifteen machines ran for more than six months across those pilots and 3devo’s own production line before launch. Each customer ran different materials under different conditions, and all arrived at the same conclusion.
Recycling powder waste, running a print farm or developing your own materials? The Multistation team can help you assess what the Filament Maker X10 can do for your business and review feasibility with your materials. Contact us to discuss it.