Reprofiling lathes, heavy-duty machine tools and additive manufacturing: maintain, repair and produce your rail parts. A single point of contact, from the initial study to the maintenance of your machines.

Multistation equips rail maintenance and manufacturing with machine tools and additive manufacturing. The Multi-Rail range is aimed at three audiences:
Depots: underfloor wheel lathes, reprofiling lathes for the wheels of dismounted wheelsets, vertical lathes, wheel mounting / dismounting presses.
Repair workshops: large gantry machines for turnout machining.
Carriages, wheels, rails and turnouts: large machine tools.
| Family | Solution | What it’s for |
|---|---|---|
| Rail lathes | SAFOP: underfloor, wheelsets, axles | Reprofile wheels and wheelsets, re-machine axles |
| Hub lathe | Mario Carnaghi: vertical lathe | Machine wheel hubs in an automated cell |
| Large machine tools | Waldrich Coburg: precision gantry machining centres | Machine turnouts |
| Cold spray | Titomic: D523, D623, TKF 1000 / 9000 | Repair and coat, with no heat input into the part |
| Polymer 3D printing | BigRep: IPSO, ALTRA, VIIO | Spare parts and tooling, with no mould |
| Laser wire metal additive manufacturing | Meltio: Engine BLUE, M600 | Clad, repair, produce blanks for machining |
| Wire arc metal additive manufacturing | WAAM3D: RoboWAAM, MiniWAAM | Large metal parts, critical spare parts |
Since 1987, Multistation has integrated every link in the digital and additive manufacturing chain. Our application engineers and service technicians handle on-site deployment, maintenance and performance guarantees.
Consulting for engineering and advice, workshops and training to build up skills.
Our teams integrate the machines into your workshop, on site.
Trade-in and buy-back to combat obsolescence; certified used machines through Multistation Second Life.
The after-sales service starts with a remote diagnosis. It leads to:
Multistation provides representation in France and local support for users of all our partner manufacturers.
Founded in 1923 in Pordenone, Italy, SAFOP produces a complete range of rail lathes for the maintenance of trains, metros and trams.
Built into the depot floor, they reprofile the wheels directly on the vehicle, without removing the wheelsets: rolling stock downtime is reduced. Passenger trains, metros, trams.
CNC lathes that reprofile worn or damaged wheelsets, in a soundproofed cabin. From passenger trains to heavy locomotives.
Turning, grinding and reprofiling of axles, with a large capacity in both length and diameter.
Medium-sized horizontal lathe with sliding guideways, for shafts, cylinders and drums. Rail is among its applications.
Discover SAFOP · SAFOP presentation (PDF)
Founded in 1929, the Italian manufacturer Mario Carnaghi has delivered more than 4,200 turning and milling machines. Its rail offering: the machining of wheel hubs and rail components.
This high-productivity machining cell combines a vertical ram head for turning, automatic loading and full enclosure. It machines the hub in an automated cycle: face facing, hub machining, groove, then undercut facing.
Founded in 1920 in Coburg, Germany, Waldrich Coburg is a world specialist in large gantry machines for milling, turning and grinding, for large, high-precision parts. Turnout manufacturers are among its main customers: these components demand very rigid, powerful and stable machines.
PowerTec-Gantry range.
Cold spray projects metal powders onto the part at high velocity, without melting them. Used in rail to repair critical components and to coat against corrosion and wear.
Repairs parts in a few minutes, in-house, with little finishing: corrosion, bearing seats, electrically or thermally conductive layers.
Portable repair of metal parts, faster and less costly than traditional methods.
Head mounted on a 6-axis robot: cladding, coatings or complete parts. Volume of 1,000 × 1,000 × 750 mm, up to 15 kg/h.
Large parts and industrial production runs, fusion of dissimilar alloys. Volume of 9,000 × 3,000 × 1,500 mm, up to 30 kg/h.
A Berlin-based leader in large-format FFF 3D printing and a strategic partner of Deutsche Bahn, BigRep produces on demand obsolete parts (housings, brackets, covers), jigs, tooling and interior fittings.
Worked example provided by BigRep.
Maintenance jigs, fixtures and tooling made in-house.
End-use parts, panels, covers and large housings.
Automated, unattended production of part series.
EN 45545-2 fire standard: according to BigRep, PC-FR, PEKK and ULTEM 9085 are compliant. Qualification is carried out per material and per risk level (HL1 to HL3).
A standard metal wire melted by laser (LMD) adds material where the part is worn: repair, cladding, coating or blanks for machining. The welding wire (Ø 0.8 to 1.2 mm) can be bought from your local suppliers, with no exclusive contract.
Integration kit that adds laser wire deposition to an existing CNC machine. The head retracts automatically to make room for machining.
The robot kit and the Meltio cell are intended for larger or more complex parts.
Near-net-shape blanks, upstream of machining centres, under an inert atmosphere.
The French Navy repaired damage using Meltio (source: Primante 3D).
More than 20 years of R&D with Cranfield University: an electric arc melts a metal wire to build or clad large parts. Local production of critical parts, spare parts management, repair.
Fast, repeatable production of heavy parts, spare parts and repairs of existing components.
Stand-alone installation, reconfigurable for large-surface parts or rotating components.
Transportable, stand-alone system, twin-wire plasma and multi-material deposition.
All three systems come with WAAMPlanner (toolpaths and parameters) and WAAMCtrl (real-time process monitoring).
Tell us about your wheelsets, your wheels, the parts you need to repair or replace: we will point you to the right machine and arrange a demonstration, at our premises or yours.